19
19
FAS-402-CH/FAS-602-CH Series Operating Instructions Ver. 1.05E
6'56
FAS-402(English) Verx.x
(
O
C)
FAS-402(English) Verx.x
(
O
F)
8-1
Operate the machine with the pre-installed operation patterns
This chapter explains how to operate the FAS-402-CH, FAS-602-CH series with the pre-installed operation
patterns to give you the general idea of how to operate the machine properly. Please get used to the FAS-
402-CH, FAS-602-CH operation with the pre-installed operation patterns.
8-2
Register sample operation patterns
This chapter explains how to register a new operation patterns with 2 examples. Please try register a new
operation pattern after reading this chapter.
8-3
Explanation of the terms
This chapter explains the commonly used terms on the display or in this manual.
Please refer to the “Explanation of terms” if you are not sure about the particular terms such as “manual
operation” or “impulse sealer.”
8-4
How to set the control unit
This chapter explains about the control unit setting and machine preparation.
8-5
Operation procedures
Maximum 4 operation patterns can be combined to create an optimum sealing method for your application.
This chapter explains the general flow of each operation procedure.
1
Turn the circuit breaker on.
2
Turn the power switch on.
The below message is displayed for 3 seconds.
8 Control unit setting and operation procedures
This chapter is composed with the following sections:
TIPS
Please perform the following steps before going into 8-1 and 8-2.
