VAMP Ltd
Overcurrent and earth-fault relay
Operation and Configuration
VAMP 130
VM130.EN003
Vamp 24h support phone : +358 (0)40 573 6316
13
4.2.
Operation indicators
LED indicators
Explanation
Measure/ remarks
Power LED lit
The auxiliary power
switched on
Normal operating state
Error LED lit
An internal relay fault has
been detected
The relay attempts to
reboot. If the error LED
remains lit, call for
maintenance
Alarm LED lit
One or several signals of the
output relay matrix have
been assigned to output
Alarm and the output has
been activated by one of the
signals. (see Chapter 5.5)
The LED is switched off,
when the signal that
caused output Alarm to
activate, e.g. the START
signal, resets. The
resetting depends on the
type of configuration;
Connected or Latched.
TRIP LED lit
One or several signals of the
output relay matrix have
been assigned to output Trip
and the output has been
activated by one of the
signals. (see Chapter 5.5)
The LED is switched off,
when the signal that
caused output Trip to
activate, e.g. the TRIP
signal, resets. The
resetting depends on the
type of configuration;
Connected or Latched.
Resetting latched indicators and output relays
All indicators and output relays can be given a latching function
in the configuration.
There are two ways to reset latched indicators and relays:
1. Move to the initial display, from the alarm list, by pushing
the CANCEL key for approx. 3 s. Then reset the latched
indicators and output relays by pushing the ENTER key.
2. Acknowledge each event in the alarm list one by one, by
pushing ENTER the equivalent times. Then, in the initial
display, reset the latched indicators and output relays by
pushing the ENTER key.
4.3.
Reading of event register
The event register can be read from the Events item of the main
menu:
1. Push the RIGHT key once, the displays shows the Event info
text
2. Push the RIGHT key once, the displays shows Count: x,
where x = the number of recorded events
3. Push the DOWN key once, the display shows the ClrEv text.
The event register can now be reset.
