VAMP 130
Overcurrent and earth-fault relay
Operation and Configuration
VAMP Ltd
12
Vamp 24h support phone : +358 (0)40 573 6316
VM130.EN003
4.
Operating measures
General
Carefully study the operating instructions in Chapters 1
through 3 of this manual before any operating measures are
taken or before any relay settings or functions are changed.
The relay can be controlled by means of the MMI on the relay
front panel, a PC running the VAMPSET software or a PC
running suitable terminal software.
4.1.
Measured data
The measured values can be read from the main menu
MEASURES menu and its submenus shown in the figure below.
MEASURES
VAMP 130
IL1=1210A,
IL2=980A,
IL3=1098A,
Io=0.0%
IL1: 1210A
IL2: 980A
IL3: 1098A
Io: 0.0A
Io: 0.0%
ILmax: 1280A
measuremode_130.cdr
IL:
1096A
Figure 4.1-1 Measures menu of VAMP 130 relay.
