Technical description
13 Revision history
VM265.EN011
VAMP 24h support phone +358 (0)20 753 3264
217
6.71
RMS mode to I> added
Programmable curve "Operation delay"
setting extended
Protocol menus visible in Vampset only if
protocol is selected into use to a port
Corrections and additions to IEC 60870-5-
101, DNP 3.0, Profibus and Modbus (slave
and TCP) protocols
DeviceNET protocol support added
DCF-77 time syncronisation support added
RMS mode added and "Operation delay"
setting extended for I>>
10.36
New CPU card with optional native IEC 61850.
Requires VAMPSET (2.2.15) or newer version. Older
versions of VAMPSET parameter files are not
compatible with 10.xx firmware.
10.38
First release with new CPU.Older versions of
VAMPSET parameter files are not compatible with
10.x firmware.
Native IEC61850 support including GOOSE added.
DeviceNET protocol support added.
UTF-8 support for local HMI panel (Russian) added
RTD Inputs- Quick Setup support added for VIO
12Ax.
EthernetIP added.
Improvements added to DNP3.0,IEC 60870-5-101
protocols.
10.45
Motor differential functions
10.46
NVRAM event buffer size is user parameter.
10.48
Support for HMS Profibus solution.
IRIG-B003.
10.49
Polarity added for relays.
VAMP265M support.
Read/write MAC address to/from EEPROM with new
chip.
IEC 61850: DI counters are reported via deadband
calculation.
10.58
New features in IEC 61850 added.
Output vef files with Suomi & Russian language
packets.
10.67
100 Mbps option card support.
10.68
Default font sizes changed.
Io>> minimum delay setting changed to 0.05s.
10.74
I> and I
0
> - I
0
>>>> -stages with faster operation time.
RSTP support.
Harmonic driver to 10ms priority
I
0CALC
driver to 10ms priority
Logic outputs to GOOSE
Summary of Contents for 265
Page 2: ...VM265 EN011...
Page 219: ...VM265 EN011...