VAMP 265, Operation And Configuration Instructions

Page: 35 / 220

Operation and configuration
instructions 2 Local panel user interface 2.4 Configuration and parameter
setting
VM265.EN011 VAMP 24h support phone +358 (0)20 753 3264
35
EXTENSION PORT X4 (pins 7, 8 and 5)
 Communication protocol for extension port X4 [Protocol].
 Message counter [Msg#]. This can be used to verify that the
device is receiving messages.

Communication error counter [Errors].

Communication time-out error counter [Tout].

Information of bit rate/data bits/parity/stop bits.
This value is not directly editable. Editing is done in the
appropriate protocol setting menus.
Ethernet port
These parameters are used by the ethernet interface. For
changing the nnn.nnn.nnn.nnn style parameter values,
VAMPSET is recommended.
 Ethernet port protocol [Protoc].
 IP Port for protocol [Port]
 IP address [IpAddr].
 Net mask [NetMsk].
 Gateway [Gatew].
 Name server [NameSw].
 Network time protocol (NTP) server [NTPSvr].
 TCP Keep alive interval [KeepAlive]
 MAC address [MAC]
 IP Port for Vampset [VS Port]
 Message counter [Msg#]

Error counter [Errors]

Timeout counter [Tout]
MODBUS
 Modbus addres for this slave device [Addr]. This address
has to be unique within the system.
 Modbus bit rate [bit/s]. Default is "9600".
 Parity [Parity]. Default is "Even".
For details see the technical description part of the manual.
EXTERNAL I/O protocol
This is a Modbus master protocol to communicate with the
extension I/O modules connected to the extension port. Only
one instance of this protocol is possible.
 Bit rate [bit/s]. Default is "9600".
 Parity [Parity]. Default is "Even".
For details see the technical description part of the manual.