Valsi GT140MG2200RV, Assembly And Operating Instructions Manual

Page: 2 / 28

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
2
SPECIFICATIONS
SAFETY AND OPERATION RULES
1
2
3
4
5
6
7
8
9
10
Read carefully and understand operator manual before
operate this product. Read and understand engine manual
prior to operation. Follow all warnings and instructions.
Know your equipment. Consider the applications, limitations
and the potential hazards specific to your unit.
Equipment must be placed on a firm, supporting surface.
Load must be kept within rating stated on generator
nameplate. Overloading will damage the unit or shorten
its life.
Engine not to be run at excessive speeds. To operate an
engine at excessive speeds increases the hazard of personal
injury. Do not tamper with parts which may increase or
decrease the governed speed.
SAFETY INFORMATION
DANGER indicates a
potentially hazardous situation
which, if not avoided, WILL
result in death or serious injury.
WARNING indicates a
potentially hazardous situation
which if not avoided could result
in death or serious injury.
CAUTION indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate personal injury, or
property damage.
DANGER WARNING CAUTION
To prevent accidental starting, always remove the
spark plug or cable from the spark plug before
maintaining the generator or engine.
Units with broken or missing parts, or without
protective housing or covers, should never be
operated. Contact your service center for replacement
parts.
Units should be not operated or stored in wet or
damp conditions or highly conductive locations
such as metal decking and steel work.
Keep the generator clean and free of oil and other
foreign matter.
Extension cords, power cords, and all
electrical equipment must be in good
conditions. Never operate electrical
equipment with damaged or defective
cords.