38
Handset Wall Holder
The remote control kit for this
fi
replace comes complete
with a wall-mounted holder. This holder is not required
in all installations but is provided as an optional feature
for those customers who wish to mount the remote
handset to the wall.
To install the holder to the wall,
fi
nd a convenient
location and use the hardware provided with the kit.
See the diagram below for required hardward and
con
fi
gurations. Note that the holder can be installed at
the base of a light switch plate.
IMPORTANT
. The location of the remote control
handset is important to insure proper temperature
regulation. To obtain a constant temperature, we
recommend that the handset should be between 3 and
15 feet away from the appliance but not directly above
it. We also advise that the handset should be located
away from any other heat source and not in direct
sunlight as this may a
ff
ect the temperature sensor
located in the remote handset.
Contents
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before
assembly)
1 Wall Bracket F
Switch Plate
Alternative 1
Alternative 2
Alternative 3
Installation
Install Handset Holder
