25
Installation
Reinstall Support Legs (if removed)
With the
fi
rebox recessed behind the smoke curtain of
the existing
fi
replace, raise it and place the individual
support legs underneath. Placing a temporary shim
under the
fi
rebox, such as a 2” x 4”, may help while
positioning the support legs. Tabs are provided on the
support legs to help position them. Fasten the support
legs at the points indicated by the arrows using the
bolts provided (2 per side).
Level Firebox in Hearth
The backside of each support leg has a leveling bolt. If
necessary, adjust the level of the
fi
rebox in the hearth.
Reinstall Burner Module
NOTE: If the circulating fan is to be installed, it should
be done at this point before installing the burner
module. See instructions packaged with the fan for
details of its installation.
Reinstall the burner module using the 10 screws
removed previously.
NOTE:
The upper ba
ffl
e may be removed to gain more
room for the screwdriver to install the rear screws.
Raise left hand side of firebox and slip
LH support leg under. Fasten with
2 bolts as indicated.
Raise right side of firebox and slip
RH support leg under. Fasten with
2 bolts as indicated.
Leveling
bolt
Front View
Side View
Fret bracket
Leg
Leveling bolt
Back
Front
Leveling
bolt
RF24JD-CL shown;
same for CA
Reassemble Appliance
