26
Installation
Reinstall Log Support
Reinstall Firebox Top Ba
ffl
e (if removed)
Install Top Convection Ba
ffl
e
Place the
fi
rebox as far back as possible within the
existing
fi
replace to allow ample space at front for the
fret, if used, and to allow convection air to
fl
ow under
the smoke curtain of the existing
fi
replace.
Slide the convection ba
ffl
e into the clips located
underneath top of appliance.
RF24JD-CL
shown;
same for CA
Install Convection Ba
ffl
e Extension
Install the convection ba
ffl
e extension, sliding it on top
of the
fi
rebox into the guides on each side.
Slide the extension in or out to allow convection air to
fl
ow under the smoke curtain of the existing
fi
replace.
At the maximum, the extension must cover the smaller
convection ba
ffl
e. At the minimum, the extension will
be butted to the vent plate.
Edge fits into
cleat at back
Underside view
Clip convection baffle
to firebox
Reassemble Appliance
