4.16
The front of the fireplace should be flat over
an area sufficient to ensure a good seal with the
closure plate. The flat surface should extend for a
height equal to that of the closure plate plus
20mm and for a width equal to that of the closure
plate plus 40mm.
4.17
If the fire is to be fitted against a wall with
combustible cladding, the cladding must be
removed from the area shown in figure 3.
4.18
The space between the fireplace front face
and the back of the appliance fascia must not be
filled in.
Page 14
©
Baxi Heating U.K. Limited 2008.
Figure 3. Area to be free of
combustible cladding
Figure 2 Fireplace catchment
space.
INSTALLER GUIDE