6. APPLIANCE INSTALLATION
6.1 Installing to a hearth.
6.1.1
Place the fire centrally on the hearth making sure that the spigot lines up with
the spigot hole in the closure plate. Gently slide the appliance into place
being
careful not to scratch the hearth.
The spigot must enter the closure plate to a depth
of at least 15mm.
6.1.2
Level the fire by loosening the lock
nuts and turning the levelling screws in the
feet up or down as required while they bear
on the hearth. When the fire is level and
square to the wall, retighten the lock nuts.
6.2 Wall mounting.
The fixing hole positions in relation to the
flue spigot opening are shown in figure 11.
Mark these positions on the wall. The
positions can alternatively be marked by
placing the fire in position and marking the
wall through the holes in the back panel.
Drill and plug the holes using no.10 wall
plugs. Place the fire in position and secure
with four no.10 x 2in. woodscrews.
Page 18
©
Baxi Heating U.K. Limited 2008.
Figure 11. Wall fixing holes
INSTALLER GUIDE
Figure 10. Closure plate for wall mounting.