![background image](http://html1.mh-extra.com/html/travis-industries/greensmart-dfc/greensmart-dfc_installation-addendum_1153951001.webp)
GreenSmart DFC Installation Addendum
(E-Clip Instructions)
Page 1 of 2
17601780 - 2/8/13
© Travis Industries, Inc.
Overview
The latest version of the GreenSmart DFC requires a positive connection between the pilot hood and the pilot
assembly for proper operation. The included E-Clip provides this connection. If the appliance being serviced
does not have an E-Clip, install the included E-Clip as shown below when replacing the DFC.
E-Clip Installation
1
Access the firebox and remove the burner (see
installation/owner’s manual for details).
2
Remove the pilot hood and place it aside.
3
Remove and discard the pilot hood clip. Needle-nose
pliers work well for this.
4
Replace the pilot hood.
5
Install the “E” clip as shown to the right.