23
© Vallox Oy - All rights reserved
Setting the date
1. Select
Settings > Time and date.
2. Select
OK
.
3. Select
Right arrow
until the 4/4 display opens.
4. Use the
Plus
and
Minus
buttons to set the date.
5. Select
Right arrow
.
6. Use the
Plus
and
Minus
buttons to set the month.
7. Select
Right arrow
.
8. Use the
Plus
and
Minus
buttons to set the year.
9. Select
OK
.
WEEK CLOCK
The week clock allows you to pre-set a weekly ventilation
program for the ventilation unit. For each hour of the week,
one of the following modes can be configured:
• At home
— The At home mode is used.
• Away
— The Away mode is used.
• Boost
— The Boost mode is used.
• Empty
— The previous mode is used.
NOTE
If you change the mode manually when the week
clock is on, the selected mode will remain active
until the week clock switches to the next mode in the
program.
If ventilation is being controlled by the humidity, carbon
dioxide or VOC sensors, they will adjust the fan speed
regardless of whether a mode has been manually selected
or selected by the week clock.
Setting and editing the weekly program
1. Select
Settings > Week clock on/off.
2. Select
OK
.
3. Select
Edit the week clock.
4. Select
OK.
5. Use the
Right arrow
button to select the desired
day.
6. Use the
Down arrow
button to select the desired
time.
7. Use the
Select
button to browse and select the
ventilation mode that will be turned on at the
chosen time. The icons are:
At home mode.
Away mode.
Boost mode.
TIP
You can turn the
week clock on or off
by pressing the
OK
button on the Week
clock display for a few
seconds.
USING THE UNIT
