16
CHANGING THE MODE
1. Press
the
Change mode
button until the desired
ventilation mode icon appears on the display.
2. Wait until the main display of the selected
ventilation mode appears.
3. The ventilation mode has now been changed.
Browsing the information of the At home,
Away, and Boost modes.
To view the ventilation mode settings:
1. Open the main display of the desired ventilation
mode .
2. Select
Mode information
.
The following information is shown on the first information
display of the mode:
•
Supply air
— Indicates the temperature of the air blown
into the building and its set value (in brackets), if the
supply air is warmer than the set value.
•
Outdoor air
— Indicates the outdoor temperature.
USING THE UNIT
10. Use the
Plus
and
Minus
buttons to set the
extract air fan speed of the Fireplace mode
as a
percentage of the maximum output ratio.
11. The extract air fan speed of the Fireplace mode is
now set.
12. Select
OK
.
IMPORTANT
The timer function of the fireplace mode can be
turned off only when the external fireplace switch has
a timer.
Finishing the setup
Once you have completed all phases of the setup, finish up
the setup as follows:
1. To change any of the set values, use the arrow
buttons to return to the desired line and then press
OK
.
2. When you are satisfied with the settings, use the
arrow buttons to select
Start
and then press
OK
.
