Valley Rainger Linear, Owner'S Manual

Page: 66 / 104

66 Rainger Linear
OPERATION
Closed Delivery
Electric Cord Operation
3. Turn the power pedestal disconnect switch to the
OFF position. See Figure 66-1.
!
DANGER
• THE DISCONNECT SWITCH MUST BE IN
THE “OFF” POSITION WHEN INSERTING OR
REMOVING THE PLUG FROM THE RECEP-
TACLE.
4. Remove plug cap from electric cord plug, and in-
sert the electric cord plug into the power pedestal
receptacle. See Figure 66-1.
!
WARNING
• ALWAYS ATTACH THE PLUG CAP TO THE
PLUG WHEN MOVING THE ELECTRIC CORD
FROM ONE POWER PEDESTAL TO ANOTHER
OR WHEN STORING THE ELECTRIC CORD.
5. Place the cord anchor cable
through the mechanical ca-
ble anchor ring on the power
pedestal.
For proper operation of the
cord anchor cable discon-
nect, there must be slack in
the electric cord between the
cord grip and plug when the
cord anchor cable is pulled
taut. See Figure 66-2.
!
WARNING
• DO NOT ATTACH ELEC-
TRIC CORD PLUG TO
POWER PEDESTAL RE-
CEPTACLE WITH PLUG
CAP COLLAR.
6. Turn the power pedestal
disconnect switch to the ON
position to energize the cart
disconnect panel.
1
2
3
4
5
Figure 66-1 1. Disconnect Switch
2. Power Pedestal
3. Plug Cap Collar 4. Plug
5. Receptacle
6
9
8
9
5
8
3
3
4
4
5
6
7
7
10
10
11
11
12
13
1
2
Figure 66-2 1. Off Position
2. On Position
3. Power Pedestal
4. Plug Cap
5. Electric Cord Plug
6. Power Pedestal Receptacle
7. Cord Anchor Cable 8. Cable Anchor Ring
9. Electric Cord
10. Cord Grip
11. Disconnect Switch
12. Cable is Slack
13. Cable is Taut