Valley Rainger Linear, Owner'S Manual

Page: 30 / 104

30 Rainger Linear
OVERVIEW
Control Panel
The control panel allows the operator to control the
machine. The control panel is located at the linear
cart. See Figure 30-1.
Basic functions controlled by the panel include:
1. Starting/Stopping
2. Selecting forward or reverse running direction
3. Selecting machine speed (which controls the
amount of water being applied).
When the machine is started, the AC power is sent
through the span cable to the tower boxes. The
control circuit distributes the power to the drive mo-
tors through the motor contactors and the machine
moves depending on the control panel settings.
Refer to the control panel owner’s manual for detailed
information about the control panel operation.
Electric Cord Drag (Options)
Closed Delivery
The electric cord mounting with safety switch can be
mounted horizontally or vertically on the cart. See
Figure 30-2.
The electric cord is spring loaded. If the electric cord
is pulled beyond the limits of the safety switch setting,
the safety switch opens to shut down the machine.
Open Delivery
The electric cord mounting with safety switch is
mounted vertically on the cart between the cart dis-
connect panel, pump panel and junction box. See
Figure 30-3.
The electric cord is spring loaded. If the electric cord
is pulled beyond the limits of the safety switch setting,
the safety switch opens to shut down the machine.
ClassicPlus
AUTO
REVERSE
AUTO
STOP
LINEAR
PIVOT
ClassicPlus Control Panel Shown
AutoPilot Control Panel Shown
Figure 30-1
1
2
Figure 30-2 Closed Delivery
1. Electric Cord Mounting (Vertical Mounting Shown)
2. Electric Cord
1
2
3
4
5
Figure 30-3 Open Delivery
1. Electric Cord Mounting
2. Electric Cord
3. Cart Disconnect Panel
4. Pump Panel
5. Junction Box