Valex 1422528, Instruction Manual And Safety Instructions

Page: 6 / 16

- 6 -
MAINTENANCE
Tool maintenance is limited to cleaning with a cloth or soft
brush avoiding the use of abrasive brushes and aggressive
detergents.
Always keep ventilation grids on the casing clean and free
to ensure correct motor cooling during use.
TROUBLESHOOTING
IMPORTANT! All the following checks must be performed
with the battery charger disconnected from the power
supply.
If the tool does not work: Check battery charge status by
pressing on the test button (where fitted) and fully charge
it if necessary.
The tool doesn’t charge: make sure your electric system
works; make sure the battery charger plug and socket are
not visibly damaged and perfectly fit; make sure the battery
charger power cable is not damaged or worn; make sure
that the power on light (where fitted) is always on when
charging.
If the tool still doesn’t work, please contact an authorised
service centre.
Amendments: All the information in this handbook meet the
standard in place on the date of printing.
The manufacturer reserves the right to make changes to
the product without prior notice in the case of technical,
production or commercial requirements.
DEMOLITION
Electric and electronic refuse may contain potentially
hazardous substances for the environment and human
health. It should therefore not be disposed of with domestic
waste, but by means of differentiated collection at specific
centres or returned to the vendor in the event of purchasing
a new identical appliance. The illegal disposal of such
equipment may result in prosecution to the full extent of the
law.
Battery disposal : The batteries included in the equip-
ment can be disposed of along with it.
Do not throw the used batteries on the fire and do not
dispose of them in the environment, but take them to
special disposal centres. Do not dispose of them with
domestic waste.
Amendments: All text, diagrams and data correspond to
the updated standard at the time of printing this manual.
The manufacturer reserves the right to update the manual
should any changes be made to the machine.
WARRANTY
The product is protected by law against all non-conformities
with respect to its stated characteristics, as long as it has
been used solely in the way described in this user’s manual,
it has not been tampered with in any way, it has not been
repaired by unauthorised personnel and, where necessary,
only original spare parts have been used. Consumables
and/or components subject to particular wear, such as
batteries, bulbs, cutting and finishing elements, etc. are
excluded from the guarantee.
Take the product to your retailer or an authorised assistance
centre, exhibiting proof of purchase.