Wiring Diagrams and Schematics
•
Cable and Connections for Doorbell/Camera
• 1R+ 12V power supply positive for Doorbell/camera.
• 2W: GND power supply ground for Doorbell/camera.
• 3Y: VIDEO image signal transmitting line.
• 4B: AUDIO audio and control lines.
•
Cable and Connections for Monitor
•
Connection block J5:
Vin, GND: Terminals for Power Supply Input.
GND, VD: Terminals for loop resistor if only one monitor, please short them.
PWR, GND, AU1, VD1, LOCK1+(SDOOR1): Terminals for Power supply/Ground/Audio/Video/Unlock
for the Doorbell/camera1.
• Connection Block J8
PWR, GND, AU2, VD2, LOCK2+( SDOOR2) : Terminals for Power supply/Ground/Audio/Video/Unlock
for the Doorbell/camera2.
•
Connection Block J9
•
Vin, GND, DATA, AUD, VD, GND Output Terminals for additional Monitors.
Valet SmartCentre
Video Intercom System
5
J5
J9
J8
Dimensions: 132mm (H) x 220mm (W) x 91mm (D)
Rear (Cut-Out) Dimensions