Valet SmartCentre
Video Intercom System
Warranty and Care Instructions
1. Valet recommends an Authorised Valet Dealer should be used to install this Video Intercom System.
Please see your conditions of warranty.
Call 1800-050-333 for your nearest Authorised Valet dealer and
installer.
2. Please ensure you use the recommended cable for the equipment set out in this guide.
3. Do not use cleaning agents or solvents on the Screens of these products. Use a moist damp cloth
and gently wipe lens surfaces outwards.
4 Image distortion may occur if your equipment is mounted too close to magnetic
fi
eld e.g. Microwaves,
TV, Audio equipment or speakers.
5 The Doorbell/Camera should be
fi
tted with an approved weather shield if the position chosen is in
direct sunlight, or in contact with rain, snow or irrigation sprinkler systems.
Technical Speci
fi
cations:
The Valet Smart Centre Video Intercom may work with cable and products not recommended or known
to Valet. However, Valet warrants its product to work as per its speci
fi
cation if the recommended cable is
used and the wiring instructions are followed.
Monitor
Display screen 5 inch TFT
Resolution > 400 TV lines
Scan frequency 15,625Hz (H)×50Hz(V)
Power voltage DC 18V
Video input
75 ohms 1Vp-p CCIR standard
Power consumption 1.5w 12 w
Wiring mode
See Charts
Dimension
258mm(W)×180mm(H)×91mm(D)
Doorbell/Camera
Camera
1/3 inch colour
Resolution 380 TV lines or <380 TV lines
Video output
75 ohms 1Vp-p CCIR standard
View angle
78-degree wide-angle camera
Min illumination 0 Lux
Night vision light 6 infrared LED
Power voltage DC 12v
20