Valet SmartCentre
Video Intercom System
SmartCentre Video Intercom Installation Instructions
Please see the relevant wiring diagram for the Smart Centre System you have chosen
and ensure you have the correct cable for that systems requirements.
Single Camera to Single Monitor Installations:
1.1 Determine both SmartCentre Monitor and Doorbell/Camera operating positions and
heights. ( Average height 1.5 to 1.6 Metres ).
1.2 Run the appropriate cable between the two positions allowing at least 350mm excess at
each location.
1.3 Ensure you run cable through the appropriate back boxes if
fi
tted.
1.4 Unplug the connection terminal from the back of the monitor. ( Terminal J5).
1.5 Ensure power supply is disconnected at this point.
1.6 Connect cables as per the wiring diagram.
1.7 Re-connect terminal to rear of Monitor.
1.8 Remove top and bottom facia trim for mounting points Install the monitor to the wall or
mounting box if
fi
tted.
1.9 Power up when Doorbell/Camera is
fi
tted.
13
