19
Brake Testing
The ‘Brake’ selection will test the braking performance of your vehicle.
To begin testing:
If you haven’t selected your test criteria, then do Step 1) and Step 2). If you have
previously selected your criteria, then proceed to Step 2).
Step 1)
From the 'Home' menu, select the Palm menu icon, the
‘Settings’, and then ‘Braking.’ See Figure 6.
You may change any of the selections in Figure 12. The
Brake_Speed is the speed that you must reach before you
are prompted to begin braking. The Stop_Speed allows
you to adjust the speed at which the test is stopped.
Note: It is recommended that you not enter a Start_G value
of less than 0.30g unless you are having trouble getting the
test to start on initial acceleration. See Appendix 1 for a
Trouble Shooting guide. See Appendix 4 for a Brake
Testing flow chart.
Figure 12
