Valdemar V1 Series, Operating Instructions Manual

Page: 47 / 60

- 46 -
WIFI Connect Method 2: intelligent network distribution mode:
The 1
st
step:
◎
By default, it can be connected within 10s after the first power-on, and it needs to be
connected by pressing buttons after 10 seconds. (10s is the delay for wifi to enter low
power consumption)
◎
Manually enter the smart distribution mode: select "SMART MODE" on the WIFI interface
of the wired controller, click "WIFI RESET" to enter the smart distribution mode, the "
"
icon on the main interface flashes, and the mobile phone can start to configure the
network.
◎
Exit the network configuration status after 3 minutes, the " " icon stops flashing, and the
WIFI module is no longer networked. If you want to configure the network again, you need
to click the "WIFI RESET" button on the WIFI interface again.
The 2 nd step:
◎
Turn on the WIFI function of the mobile phone and connect to the WIFI hotspot. The WIFI
hotspot must be able to connect to the Internet normally, as shown in the figure: Connect
the WIFI hotspot "123456789".