User's Guide _______________________________________________________________________
52 ___________________________________________________________________ M210470EN-B
where
a
=
Device address (default = 0)
R
=
Send continuous measurement command:
x
=
The desired measurement. O
nly value 3 (precipitation)
can be used.
!
=
Command terminator
The response:
a+<data fields>
<cr><lf>
where
a
=
Device address
<data fields> =
Precipitation parameters separated with '+' marks.
<cr><lf>
=
Response terminator
Example (device address 0):
0R3!
0+0.15+20+0.0+0.0+0+0.0<cr><lf>
Start verification command (aV)
This command is used to query self diagnostic data from the device.
However, the command is not implemented in the WXT510. The self-
diagnostic data can be requested with
aM5
command.
