User’s Guide ______________________________________________________________________
82 ___________________________________________________________________M211486EN-A
Recording the Surface Ozone
In the MW41 Monitoring window, go to the
Tabular data
tab and
select
Raw ozone
from the drop-down list. Make sure that ozone data
is coming through, showing reasonable ozone current and ozone flight
box temperature.
1403-169
Figure 55
Viewing Raw Ozone Data in MW41
Launching the Balloon
Before launching the balloon, check the MW41 user interface to see that
ozone sensor data is received. When MW41 shows the message "Ready
for release", you can launch the sounding balloon.
After the release, check that the ozone data is stable in MW41.
NOTE
The ASOPOS panel recommends the following: It is important that,
before the launch, the ozone sensor has sampled surface air for at least
5 minutes; 10 minutes is recommended.
