Chapter 3 _____________________________________________ Constructing an Ozone Sounding
VAISALA_______________________________________________________________________ 53
2.
Use a screwdriver to insert the dowels where the holder screw
marks are. Use the three dowels included in the RSA411 kit.
1403-168
Figure 17
Inserting the Dowels
3.
Remove the tape cover before attaching the holder. The tape makes
the radiosonde holder attachment extra secure.
4.
Hold the radiosonde holder against the tape and use a screwdriver
to attach it to the box wall with the screws provided in the RSA411
kit.
Attaching OIF411 to SPC’s Ozone
Sensor Frame
shows how OIF411 is attached to Science Pump
Corporation’s (SPC ) Model ECC-6A ozone sensor frame. See also the
steps below. You do not need any extra equipment to attach OIF411 to
the ozone sensor frame, the wing nuts needed are included in OIF411.
For instructions on attaching OIF411 to Droplet Measurements
Technologies (DMT) Model Z ozone sensor frame, see section
