Safety 1
0020244995_02
ecoTEC
pro
Installation
and
maintenance
instructions
7
–
BS 8558 Guide to the design, installation,
testing and maintenance of services sup-
plying water for domestic use within build-
ings and their curtilages.
–
BS 6880 Code of practice for low temper-
ature heating systems with outputs above
45 kW, Part 1, 2, and 3.
–
BS 6891 Installation of low pressure gas
pipe work of up to 35mm in domestic
premises.
–
BS 4814 Specification for: Expansion
vessels using an internal diaphragm, for
sealed hot water and heating systems.
–
BS 7074 Application, selection and install-
ation of expansion vessels and ancillary
equipment for sealed water systems., Part
1 and 2.
–
BS 7593 Code of practice for treatment of
water in domestic hot water central heating
systems.
–
BS 12831 Heating systems in buildings.
Method for calculating design heat load.
–
BS EN 13831 Closed expansion vessels
with built in diaphragm.
–
EN 14336 Heating systems in buildings.
Installation and commissioning of water
based heating systems.
–
BS 5440
–
1 Installation of flues and vent-
ilation for gas appliances of rated input not
exceeding 70kW*
–
BS 5440
–
2 Flueing and ventilation for gas
appliances of rated input not exceeding
70kW*
* 1st 2nd and 3rd family gases.
–
BS 5449 Forced circulation hot water sys-
tems up to 45kW.
–
BS EN 6798 Installation & maintenance of
gas fired hot water boilers of rated input
not exceeding 70kW net.
–
BS 5482 - Part 1 Domestic butane and
propane gas burning installations
Institute of Gas Engineers Publications:
–
IGE/UP/1B (Edition 2) Tightness testing
and direct purging of small natural gas
installations.
–
IGE/UP/ 7 (Edition 2) Gas in timber and
light steel framed buildings.
Additionally for gas boilers systems with out-
puts greater than 70KW.
–
BS 6644 Installation of gas boilers
between 60 kW and 2 MW (2nd and 3rd
family gases)
–
BS 5449
–
IGE/UP/1 (Edition 2) Strength testing,
tightness testing and direct purging of in-
dustrial and commercial gas installations.
–
IGE/UP/1A (Edition 2) Strength testing,
tightness testing and direct purging of
small, low pressure industrial and com-
mercial natural gas installations.
–
IGE/UP/10 Installation of gas appliances
in industrial and commercial premises.
Part 1 Flued appliances.
–
The installation must comply with the cur-
rent version of the Clean Air Act.
1.5
Related documents
–
I.S. 813 Domestic Gas Installations
–
I.S. 820 Non Domestic Gas Installations
–
Building Control Act 2007
–
ETCI Regulations for installing electrical
systems
