VADDIO EasyIP Systems Complete Manual Download Page 67

Page: 67 / 95

video type

ASY

IP D

ECODER ONLY

Gets or sets the type of video associated with the specified input device.

Synopsis

video <input> type { get | set { camera | video }}

Options

<input1..input4>

Specifies the input device.

get

Returns the input device's video type.

set

Sets the input device's video type.

camera

Specifies the input device as a camera.

video

Specifies the input device as a video input
other than a camera.

Examples

>video input1 get

input type:

camera

Returns the type of device at input 1.

trigger

ASY

IP D

ECODER ONLY

Turn an existing trigger on or off. This command has no effect if the specified trigger has not been defined.

Note

If the web interface's macro/trigger test mode is in use, this command may return parse errors.

Synopsis

trigger <index> { off | on }

Parameters

<index>

The trigger index (identifier) – integer 1 to 50.

{off | on}

Set the state of the trigger.

Example

> trigger 3 on

Turns trigger 3 on.

Complete Manual for EasyIP Systems

Summary of Contents for EasyIP Systems
































































































Search results

Summary of Contents for EasyIP Systems

Reviews:

VADDIO EasyIP Systems, Complete Manual, Page: 67 / 95

Search results

Summary of Contents for EasyIP Systems

Reviews: