camera focus
E
ASY
IP 10
E
ASY
IP D
ECODER
Changes the camera focus.
When sending the command to the EasyIP Decoder, you must specify the camera input.
Synopsis
camera
<input>
* focus { near [<speed>] | far [<speed> | stop | mode {get | auto |
manual} }
*
<input>
used only when sending commands to the EasyIP Decoder
Options
<input>
Integer 1 to 4; specifies the camera to control.
near
Brings the focus nearer to the camera. Can
only be used when camera is in manual mode.
far
Moves the focus farther from the camera. Can
only be used when camera is in manual mode.
<speed>
Optional: integer (1 to 8) specifies the focus
speed.
mode [get | auto | manual]
Returns the current focus mode, or specifies
automatic or manual focus.
stop
Stops the camera's focus movement.
Examples
camera focus near 2
OK
>
(Sent to the camera) Brings the focus near at a speed of 2.
camera 2 focus mode get
auto_focus:
on
OK
>
(Sent to the EasyIP Decoder) Returns the current focus mode of the Input 2
camera.
54
Complete Manual for EasyIP Systems