camera tilt
E
ASY
IP 10
E
ASY
IP D
ECODER
Moves the camera vertically.
When sending the command to the EasyIP Decoder, you must specify the camera input.
Synopsis
camera
<input>
* tilt { up [<speed>] | down [<speed>] | stop | get | set <position>
[<speed>] }
*
<input>
used only when sending commands to the EasyIP Decoder
Options
<input>
Integer 1 to 4; specifies the camera to control.
up
Moves the camera up.
down
Moves the camera down.
<speed >
Optional: Integer 1 to 20; Specifies the tilt
speed. Default speed is 10.
stop
Stops the camera's vertical movement.
set
<position>
Sets the camera's absolute tilt position in
degrees, as a floating point value between -
30.00 and 93.00.
The
camera tilt set
command blocks
execution of subsequent commands until the
camera reaches the specified position.
get
Returns the camera's absolute tilt position in
degrees, as a floating point value between
approximately -30.00 (down) and 93.00 (up).
Note that the range is 30.00 to -93.00 if Image
Flip is selected.
Examples
>
camera tilt up
OK
>
(Sent to the camera) Tilts the camera up at the default speed.
>
camera 1 tilt down 20
OK
>
(Sent to the EasyIP Decoder) Tilts the specified camera down at a speed of 20.
>
camera tilt set -5
OK
>
(Sent to the camera) Tilts the camera 5° down from level at the default speed.
52
Complete Manual for EasyIP Systems