VADDIO EasyIP Systems Complete Manual Download Page 62

Page: 62 / 95

camera ccu set

ASY

IP 10

ASY

IP D

ECODER

Sets the specified CCU (lighting) information.

When sending the command to the EasyIP Decoder, you must specify the camera input.

Synopsis

camera

<input>

* ccu set <param> <value>

<input>

used only when sending commands to the EasyIP Decoder

Options

<input>

Integer 1 to 4; specifies the camera to control.

auto_iris

{on | off}

Sets the auto-iris state (on or off). Auto-iris
disables manual iris and gain when it is on.

auto_white_balance

{on | off}

Sets the auto white balance state (on or off).
Auto white balance overrides red gain and blue
gain manual settings.

backlight_compensation

{on

| off}

Sets the backlight compensation state (on or
off). Can only be used when wide dynamic
range is off.

blue_gain

<0..255>

Sets the blue gain (integer 0 to 255). Can only
be used when auto white balance is off.

chroma

<0..14>

Sets the chroma (integer 0 to 14).

detail

<0..15>

Sets the detail (integer 0 to 15).

gain

<1..11>

Sets gain (integer 1 to 11). Can only be used
when auto-iris is off.

gamma

<-16..64>

Sets the gamma (integer -16 to 64)

iris

<0..11>

Sets the iris (integer 0 to 11). Can only be used
when auto-iris is off.

red_gain

<0..255>

Sets the red gain (integer 0 to 255). Can only be
used when auto white balance is off.

wide_dynamic_range

{on | off}

Sets Wide Dynamic Range on or off. Can only
be used when backlight compensation is off.

Examples

camera ccu set auto_iris off

(Sent to the camera) Turns off auto-iris, returning the camera to manual iris control.

camera 1 ccu set red_gain 10

(Sent to the EasyIP Decoder) Sets red gain to 10 for the Input 1 camera.

Complete Manual for EasyIP Systems

Summary of Contents for EasyIP Systems
































































































Search results

Summary of Contents for EasyIP Systems

Reviews:

VADDIO EasyIP Systems, Complete Manual, Page: 62 / 95

Search results

Summary of Contents for EasyIP Systems

Reviews: