VADDIO EasyIP Systems Complete Manual Download Page 60

Page: 60 / 95

camera preset

ASY

IP 10

ASY

IP D

ECODER

Moves the camera to the specified preset, or stores the current camera position.

When sending the command to the EasyIP Decoder, you must specify the camera input.

Synopsis

camera

<input>

* preset { recall | store} [1 - 16] [save-ccu]

<input>

used only when sending commands to the EasyIP Decoder

Options

<input>

Integer 1 to 4; specifies the camera to control.

recall

<1 - 16>

Moves the camera to the specified preset.

store

<1 - 16>

Stores the current camera position as the
specified preset.

save-ccu

Optional: Saves the current CCU (color and
lighting) settings as part of the preset. If not
specified, the last color settings are used when
recalled.

Examples

camera preset recall 3

(Sent from the camera) Moves the camera to preset 3.

camera 3 preset store 1

(Sent from the EasyIP Decoder) Saves the Input 3 camera's current position as
preset 1.

Complete Manual for EasyIP Systems

Summary of Contents for EasyIP Systems
































































































Search results

Summary of Contents for EasyIP Systems

Reviews:

VADDIO EasyIP Systems, Complete Manual, Page: 60 / 95

Search results

Summary of Contents for EasyIP Systems

Reviews: