Operating the System Using the Web Interface
Although the EasyIP 10 cameras have their own web interfaces, the system can be operated from the
EasyIP Decoder, which provides audio controls as well as video input selection and controls for the
selected video input. Instructions and screen shots in this chapter are for the EasyIP Decoder unless
otherwise noted.
You will need to know the device's IP address to use its web interface. You will also need to know the user
password if guest access is not enabled.
To discover the EasyIP Decoder's IP address:
While viewing the USB stream, press the IP Address button on the front of the EasyIP Decoder. The
decoder overlays its IP address and MAC address on the video output. Press the button again to dismiss
the information display.
To access the EasyIP Decoder's web interface:
Enter the IP address or hostname in your browser's address bar. If you use the hostname, you may need to
enter
https://
as a prefix to keep the browser from treating it as a search query.
By default, the web interface opens to a login page, but each EasyIP device can be configured to allow non-
administrative access without logging in. Check with the system administrator if you need the credentials
to log in.
The operator's page varies in appearance, depending on the controls that the system administrator sets up
on the active input device.
46
Complete Manual for EasyIP Systems