Configuring and Adjusting Cameras
Cameras are configured and adjusted individually. Most of the settings and adjustments are on the Camera
page of the camera's administrative web interface.
n
Home position and other preset positions
– When the camera comes out of standby mode, it
moves to its Home position. You can define additional preset positions; these include pan, tilt, and
zoom information and may optionally include color adjustments. Presets 1 - 6 are available using the
Vaddio IR Remote Commander; all defined presets are available from the operator's (non-
administrative) web interface.
n
Color and lighting adjustments
– Each room may need different color and lighting settings. Cameras
in different areas of the same room may also need different settings.
n
Speed adjustments
– Cameras have separate speed settings for manual movements and movements
to presets.
n
Focus adjustment
– Focus controls are also available on the IR Remote Commander, but not in the
operator's web interface.
n
Indicator light behavior
– By default, the camera's indicator light is on if the camera has power. You
can change this.
n
Other camera settings
– Image orientation can be changed. This is helpful for ceiling-mounted
cameras, unless you prefer upside-down video.
Setting the Home Position and Other Preset Shots
E
ACH
E
ASY
IP 10
CAMERA
– C
AMERA PAGE
Presets are saved shots. Each preset includes pan, tilt, zoom, and (optionally) color settings. When you
reboot the camera or bring it out of standby, it returns to the Home preset.
Home and presets 1 through 6 are available with the IR Remote Commander; the others are only available
from the web interface.
27
Complete Manual for EasyIP Systems