vacon • 86
Monitoring menu
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
6.1.6
Timer functions
Here you can monitor values of timer functions and the Real Time Clock.
6.1.7
PID Controller
Table 51. Monitoring of timer functions
Code
Monitoring value
Unit
Scale
ID
Description
V2.7.1
TC 1, TC 2, TC 3
1
1441
Possible to monitor the statuses of the three
Time Channels (TC)
V2.7.2
Interval 1
1
1442
Status of timer interval
V2.7.3
Interval 2
1
1443
Status of timer interval
V2.7.4
Interval 3
1
1444
Status of timer interval
V2.7.5
Interval 4
1
1445
Status of timer interval
V2.7.6
Interval 5
1
1446
Status of timer interval
V2.7.7
Timer 1
s
1
1447
Remaining time on timer if active
V2.7.8
Timer 2
s
1
1448
Remaining time on timer if active
V2.7.9
Timer 3
s
1
1449
Remaining time on timer if active
V2.7.10
Real time clock
1450
hh:mm:ss
Table 52. PID Controller value monitoring
Code
Monitoring value
Unit
Scale
ID
Description
V2.8.1
PID setpoint
Varies
According to
P3.13.1.7
20
PID controller setpoint value in process units.
Process unit is selected with a parameter.
V2.8.2
PID feedback
Varies
According to
P3.13.1.7
21
PID controller feedback value in process units.
Process unit is selected with a parameter.
V2.8.3
PID error
Varies
According to
P3.13.1.7
22
PID controller error value. Deviation of feedback
from setpoint in process units. Process unit is
selected with a parameter.
V2.8.4
PID output
%
0.01
23
PID output in percent (0...100%). This value can
be fed e.g. to Motor Control (Frequency refer-
ence) or Analogue output
V2.8.5
PID status
1
24
0=Stopped
1=Running
3=Sleep mode
4=In dead band
