User interfaces
vacon • 55
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
5.1.5
Text keypad
You can also choose a so-called
Text keypad
for your user interface. It has mainly the same func-
tionalities as the graphical keypad although some of these are somewhat limited.
5.1.5.1
Keypad display
The keypad display indicates the status of the motor and the drive and any irregularities in motor or
drive functions. On the display, the user sees information about the drive and his present location in
the menu structure and the item displayed. If the text on the text line is too long to fit in the display,
the text will scroll from left to right to reveal the whole text string.
5.1.5.2
Using the text keypad
Editing values
Change value of a parameter following the procedure below:
1.
Locate the parameter.
2.
Enter the Edit mode by pressing OK.
3.
Set new value with the arrow buttons up/down. You can also move from digit to digit with the
arrow buttons left/right if the value is numerical and change then the value with the arrow but-
tons up/down.
4.
Confirm change with OK button or ignore change by returning to previous level with Back/
Reset button.
Figure 23. Editing values
9167
.e
m
f
Indicators:
Status
Indicators:
Alarm, Fault
Indicators:
Direction
Indicators:
Control place
Group or parameter
name
Menu location
OK
OK
OK
BACK
RESET
9168.emf
