8 Care and maintenance
Disassembling the milk frother
▸ Remove the lid
1
from the milk jug.
▸ Extract the milk jug
2
from the thermal casing
3
, hold-
ing it by the side grips.
▸ Remove the milk spout
4
and milk tube
5
.
▸ Turn the adjusting knob
6
to position
and re-
move.
3
2
1
INSERT
CLEAN
5
4
1
6
Cleaning and reassembling the milk frother
The thermal casing 3 must not be filled with or immersed in water!
▸ Clean the thermal casing
3
with a soft cloth only.
▸ Clean the other parts of the milk frother in the dish-
washer or with hot water and a mild detergent.
▸ Make sure there are no milk residues stuck to the
milk spout
4
or milk tube
5
.
▸ Remove any milk residues from the groove of the ad-
justing knob
6
with a toothpick.
▸ Clean the adjusting knob seat
7
and the milk frother
connector hole
8
.
▸ Insert the adjusting knob
6
in the seat
7
and turn to
position
.
▸ Insert the milk spout
4
and milk tube
5
.
▸ Place the milk jug
2
in the thermal casing
3
.
▸ Put the lid
1
on the milk jug
2
.
▸ Clean the connection nozzle (see page 38).
3
H
2
O
6
1
6
8
7
37
