1 Safety warnings
8
Caution!
▪
Do not switch the appliance off during
descaling.
1.4
Instructions for use
Correct use
▪
This appliance is designed and made
to prepare coffee and heat drinks. All
other use is considered improper.
▪
This appliance is not suitable for com-
mercial use.
▪
The manufacturer is not liable for dam-
age deriving from improper use of the
appliance.
▪
This appliance can be installed over a
built-in oven if the latter is fitted with a
cooling fan at the rear (maximum mi-
crowave power: 3 kW).
Cleaning and maintenance of materials in
contact with food
▪
The first time you use the appliance, or
if it is not used for more than 3 or 4
days, rinse all removable accessories
which may come into contact with water
or milk with hot water.
▪
If the appliance is not used for more
than 3 or 4 days, before making the
first beverage, rinse the water circuit as
described in these Operating Instruc-
tions.
▪
You should carry out automatic clean-
ing and guided maintenance scrupu-
lously when indicated by the appliance
through the display or the lights (see
page 31).
Installing the appliance
Important!
▪
Installation must be performed by a
qualified professional in compliance
with legislation in force in the country
of installation (see page 8).
▪
The packing elements (plastic bags,
polystyrene foam, etc.) should be kept
out of reach of children (see page
49).
▪
Never install the appliance in rooms
where the temperature may drop to
0°C or lower. Customise the water
hardness as soon as possible follow-
ing the instructions in the “Water hard-
ness” section (see page 29).
Connecting the appliance
Danger!
▪
Check that the mains power supply
voltage corresponds to the value indic-
ated on the rating plate on the left-
hand side of the appliance.
▪
Connect the appliance to an efficiently
earthed and correctly installed socket
with a minimum current rating of 10A
only.
▪
If the power socket does not match the
plug on the appliance, have the socket
replaced with a suitable type by a qual-
ified professional. To comply with
safety directives, an omnipolar switch
with a minimum contact distance of 3
mm must be installed.
▪
Do not use multiple sockets or exten-
sions.
Built-in installation
Important!
▪
Verify the minimum measurements re-
quired for correct installation of the ap-
pliance. The coffee machine must be
installed in a column and the column
must be firmly fixed to the wall with
commercially available brackets.
▪
Important: all installation or mainten-
ance operations must be performed
with the appliance disconnected from
the mains electricity supply.