8 Care and maintenance
Discarding the rinsing solution
▸ When the corresponding message appears in the dis-
play: Remove the water tank
2
, rinse under running
water, fill with water up to the MAX level and place
back in the appliance.
▸ Empty the rinsing solution out of the 2-litre receptacle.
▸ Touch .
I
0
1
2
5
6
▸ When the corresponding message appears in the dis-
play: Place the empty 2-litre receptacle under the hot-
water/steam spout
5
and coffee spout
6
.
▸ Touch to start the rinse cycle.
–
The rinse cycle starts.
–
In the display appears: «Rinsing underway –
Please wait».
–
Hot water comes out of the hot-water/steam spout
5
.
▸ When the corresponding message appears in the dis-
play: Touch , remove the water tank
2
and place the
water softener filter in its housing.
▸ When the corresponding message appears in the dis-
play: Empty the rinsing solution out of the 2-litre re-
ceptacle and repeat the rinse cycle.
If the water tank has not been filled to the MAX level, the appliance requests a
third rinse cycle. This ensures that the descaler solution is completely eliminated
from the appliance’s internal circuits.
Completing descaling
▸ When the corresponding message appears in the dis-
play: Remove, empty and put back the drip tray
3
and
grounds container
4
.
▸ Touch .
▸ In the display appears: «Descale complete –
press ».
▸ Touch .
▸ When the corresponding message appears in the dis-
play: Remove the water tank
2
, empty out the rinsing
solution, rinse the water tank
2
under running water,
fill with water up to the MAX level and place back in
the appliance.
▸ Close the service door
1
.
▸ Empty the rinsing solution out of the 2-litre receptacle.
1
3 4
I
0
1
2
40
