41
NivoGuide® 8100 • Two-wire 4 … 20 mA/HART
6 Set up with the display and adjustment module
58878-EN-190215
In menu item "
Scaling variable
" you define the scaling variable and
the scaling unit for the interface value on the display, e.g. volume in l.
In menu item "
Scaling format
" you define the scaling format on the
display and the scaling of the measured interface value for 0 % and
100 %.
Since scaling is very extensive, scaling of the level value was divided
into two menu items.
In menu item "
Current output, variable
" you specify which measured
variable the current output refers to.
In menu item "
Current output, adjustment
" you can assign a respec-
tive measured value to the current output.
In this menu item you can select the type and size of your probe from
a list of all possible probes. This is necessary to adapt the electronics
optimally to the probe.
Additional settings - Scal-
ing interface - Scaling
variable
Additional settings - Scal-
ing interface - Scaling
format
Additional settings - Cur-
rent output
Additional settings -
Current output - Current
output, meas. variable
Additional settings -
Current output - Current
output, adjustment
Additional settings -
Probe type
Summary of Contents for NivoGuide 8100
Page 72: ...72 NivoGuide 8100 Two wire 4 20 mA HART INDEX 58878 EN 190215 U Units 26 ...
Page 73: ...73 NivoGuide 8100 Two wire 4 20 mA HART Notes 58878 EN 190215 ...
Page 74: ...74 NivoGuide 8100 Two wire 4 20 mA HART Notes 58878 EN 190215 ...
Page 75: ...75 NivoGuide 8100 Two wire 4 20 mA HART Notes 58878 EN 190215 ...
