Uwatec Galileo sol, User Manual

Page: 22 / 80

20
2. Menus, settings and functions
2.3.4 ppO
2
max (default: 1.4bar)
The value of ppO
2
max determines your
MOD based on your oxygen mix. You can
set this value between
1.2bar and 1.6bar
or OFF .
If you set ppO
2
max to OFF , you will not get
any MOD warnings. If you choose OFF ,
you will be required to enter an additional
confi rmation in the form of a safety code.
The safety code is
313 . This prevents
unintentionally setting the ppO
2
max to OFF .
To enter the code, use the + and - buttons
to defi ne the fi rst digit ( 3 ), then press >>
to confi rm it. Now defi ne the next digit ( 1 ),
confi rm by pressing >> , then defi ne the
last digit ( 3 ). Upon pressing SAVE after
having defi ned the last digit, ppO
2
max will
be set to OFF and you will have no related
warnings. The display shows the message
ppO
2
max SET TO OFF SUCCESSFUL
for 2 seconds.
!
WARNING
Setting the ppO
2
max value to OFF can result
in exposure to high levels of oxygen partial
pressure and can result in serious injury or
death.
2.3.5 Nitrox reset time
(default: no reset)
If you set the computer to an oxygen
concentration higher than 21% (diving
with Nitrox), you can decide whether the
computer should revert back to 21% (air)
at some point in time or if it should stay set
to the given oxygen concentration until you
change it manually. This is done via the Nitrox
reset time. If you set the Nitrox reset time
to
NO RESET , the computer will maintain
the given oxygen concentration until you
change it manually. If you set the Nitrox
reset time to any value between
1 hour and
48 hours , the computer will automatically
change the oxygen concentration back to
21% after the specifi ed time interval has
elapsed.
2.3.6 Water type (default: salt)
You can set the computer for fresh water
or salt water calibration, depending on
where you intend to dive. Setting the
wrong water type entails an error in depth