Uwatec Galileo sol, User Manual

Page: 14 / 80

1. Introduction to Galileo
12
!
WARNING
Starting a dive when the REPLACE
BATTERY message is displayed can cause
the computer to fail during the dive. Replace
the battery as soon as you notice this
message.
Low battery situations during a dive are
described in section 3.2.6.
See Chapter 5 for information on how to
replace the battery.
1.8 Screen confi guration
options (patent pending)
In dive mode, Galileo displays data in one
of three pre-confi gured screen lay-outs:
CLASSIC , LIGHT or FULL .
- The CLASSIC confi guration is set
as default and shows all standard
information needed during the dive; this
lay-out can be chosen with or without a
grid separating the various fi elds;
- the LIGHT confi guration maximizes the
size of the displayed data by focusing
on only the absolutely necessary
information;
- the FULL confi guration maximizes the
amount of information displayed.
Galileo also has a gauge mode, with a
corresponding
GAUGE confi guration,
in which the computer acts as a digital
depth gauge and does not perform any
decompression calculation.
NOTE:
The LIGHT confi guration does not
support dives with MB level stops,
decompression stops or multi gas.
In these cases Galileo automatically
switches to the
CLASSIC confi guration.
For all three confi gurations and in gauge
mode it is possible to call up the digital
compass at any time during the dive. It is
also possible to rotate the entire screen by
180 degrees, so that the computer can be
worn with the buttons on the top or on the
bottom.