Uwatec Galileo sol, User Manual

Page: 57 / 80

3. Diving with Galileo
55
English
In compass mode, the safety stop timer
works the same way as in the
CLASSIC ,
LIGHT and FULL confi gurations. If the
safety stop timer is active while switching
from one confi guration to the other, the
timer information itself will transition
smoothly between displays.
3.4.4 Viewing dive profi le, individual
compartment saturation and
pictures
You can view your dive profi le by pressing
and holding the middle button (marked
MORE ). The screen will show a graphic
representation of your dive profi le together
with a line representing either your possible
direct ascent (if in no-stop mode) or your
decompression profi le (if in decompression
mode). The dive profi le will remain on your
screen for a maximum of 12 seconds after
which the dive computer information will
appear again. You can revert to the dive
computer screen at any time by
pressing
and holding the right button.
Pressing MORE while the dive profi le
is displayed brings up a graphical
representation of the relative saturation for
each of the eight compartments modeled
by the ZH-L8 ADT MB algorithm. The
height of each bar indicates the ratio of
the current tissue loading with respect to
the maximum tolerable loading, expressed
in percentage. The color denotes whether
the compartment is ongassing or
offgassing: grey denotes compartments
that are offgassing, while black denotes
compartments that are ongassing. This
representation, aside for the colors, is
analogous to that given by the SmartTRAK
software described in section 4.3. This
graphical representation will remain on your
screen for a maximum of 12 seconds after
which the dive computer information will
appear again. You can revert to the dive
computer screen at any time by
pressing
and holding the right button.