Uwatec Galileo sol, User Manual

Page: 42 / 80

40
2. Menus, settings and functions
If there is remaining desaturation on the
computer at the time of starting the dive
planner, the text
ADD . SURF . INT . appears
on the display. This allows you to defi ne an
additional surface interval to what has already
elapsed since the end of the last dive.
Press
the + or - buttons to defi ne this interval, then
press >> to confi rm it. If at present there is
a prohibited altitude recommendation due
to the last dive, Galileo shows you how the
prohibited altitude changes with increasing
surface interval.
Press >> directly if you want
to plan without an additional surface interval.
In case Galileo is displaying the no-dive
warning (section 1.5), the duration of the
warning itself is displayed as recommended
surface interval for planning purposes
(rounded up to the nearest fi fteen minute
increment).
2.11.1 Planning a no-stop dive
To plan a no-stop dive, enter a depth using
the
+ or - buttons (depth will change in
3m/10ft increments): Galileo will show you
what the corresponding no-stop time is.
Depths greater than the current MOD are
not displayed.
Press and hold >> at any
time to exit the dive planner and return to
the main menu.
NOTE:
If you have set ppO
2
max to OFF , the
planner will show only depths up to
a corresponding ppO
2
max value of
1.6bar.
At any point, press >> to switch to the
decompression dive planner for the
indicated depth. Galileo will add one minute
to the no-stop time and show the resulting
decompression obligation.
2.11.2 Planning a decompression dive
Once in the decompression dive planner,
you can change the bottom time in one
minute steps via the
+ and - buttons.
Every time you increase the bottom time,
Galileo shows you the corresponding
decompression schedule in terms of
deepest stop, time at deepest stop and
total ascent time.
Pressing >> while in the decompression
dive planner will bring you back to the no-
stop dive planner. This allows you to choose
a different depth and continue planning. To
exit the dive planner at any point in time,
press and hold >> . This will bring you
back to the main menu.
2.12 Reviewing the logbook
A dive is entered into the logbook if the
dive time is longer than 2 minutes. Galileo
can record the profi les of approximately
100 hours of diving. The information can
be transferred to PC via the SmartTRAK
software and an infrared interface (see
Chapter 4 for details). In addition, Galileo
can show most of the information directly