54
3. Diving with Galileo
set bearings are kept in the profi le memory
and can be viewed with SmartTRAK after
downloading the dive to a PC.
If you have set a reference bearing, arrows
will appear to the left or to the right of the
numeric bearing indication, to show you in
which direction you should turn in order to
match the set bearing. As an additional aid
in navigation, Galileo automatically marks the
positions at 90 and 120 degrees to the left
and to the right of the set bearing, in addition
to the position at 180 degrees (as an aid
for square course, triangular course and
reciprocal course navigation respectively).
These are denoted with
┴
,
∆
and
⍢
.
The left button (
BOOK
) still allows you to
set bookmarks.
3.4.2 Setting
bookmarks
By
pressing
the left button (
BOOK
) you
can set any number of bookmarks as
reminders of particular moments during the
dive. In
CLASSIC
,
FULL
and
COMPASS
confi gurations, setting a bookmark also
resets the stopwatch.
When you set a bookmark, Galileo
will display the confi
rmation message
BOOKMARK SET
(if the safety stop timer
is visible on the display, the message is not
displayed. In
FULL
and
GAUGE
display
confi gurations it also does not show, since
the reset of the stopwatch is already an
indication that the bookmark was set
successfully). The bookmarks will appear
on the dive profi le in SmartTRAK.
3.4.3 Safety
stop
timer
At the end of a dive, at depths of 6.5m/20ft or
shallower and if there are no decompression
obligations, the left button label changes
from
BOOK
to
TIMER
(unless the option is
turned
OFF
, see section 2.3.3).
If
SAFETY STOP TIMER
in
DIVE
SETTINGS
is set to
AUTOMATIC
:
if a minimum depth of 10m/30ft has
been reached during the dive, at a depth
of 5m/15ft the safety stop timer will
automatically start a countdown and a
bookmark will be added to the dive profi le.
If you go below 6.5m/20ft, the timer will
disappear and the no-stop time is shown
again. Upon returning to 5m/15ft, the timer
will start again automatically. As long as
you are shallower than 6.5m/20ft and there
are no decompression obligations, you
can
press TIMER
to start or restart the
countdown manually.
If
SAFETY STOP TIMER
in
DIVE SETTINGS
is set to
MANUAL
:
at a depth of 6.5m/20ft and shallower
pressing TIMER
will activate the safety
stop timer and add a bookmark to the
dive profi le. You can restart the timer any
number of times. If you go below 6.5m/20ft,
the timer will disappear and the no-stop
time will be shown again. You need to
press TIMER
again upon ascending over
6.5m/20ft to restart the timer.
If
SAFETY STOP TIMER
in
DIVE SETTINGS
is set to
OFF
:
It is not possible to activate the safety stop
timer.
Summary of Contents for Galileo sol
Page 1: ...English ...
Page 2: ......
