Uwatec ALADIN PRO ULTRA Operating Manual Download Page 76 | Manualshive

Page: 76 / 84

background image

76

1 MemoMouse, DataTrak and DataTalk

VII Uwatec

®

Aladin

®

Pro Ultra

The Aladin

®

Pro Ultra is able to communicate with a personal computer. The connection is established by

contact sensors and the MemoMouse. The MemoMouse and the PC software DataTrak and DataTalk is
available as an option. For the Aladin

®

Pro Ultra it is only allowed to use DataTalk version 2.0 or higher.

Communication with a personal computer (Windows

®

) has a number of advantages:

1.1 Personal programming of the dive computer (DataTalk)

Several parameters can be set individually by the user, e.g.:
• The physical units of water depth and tank pressure can be selected (metric/imperial).
• The attention message acoustic signals can be switched off if desired (see page 35, 36). The actual atten-

tion message displays are not affected by the acoustic signal being switched off. The acoustic messages
for alarms cannot be switched off.

• The maximum allowable partial pressure of oxygen can be adjusted between 1.2 and 1.95 bar.

• ppO

2

max must not be set higher than 1.6 bar

• If you switch off the acoustic attention buzzer of the Aladin

®

Pro Ultra you

must pay careful attention to the visual signals on the face of the Aladin

®

Pro

Ultra. Failure to follow all alarms whether audible or not may lead to serious
injury or death due to decompression sickness, and/or drowning.

1.2 Analysis and storage of real dives

The last approx. 200 minutes of dive time are stored by the dive computer in increments of 20 seconds
and can be transferred to the PC. The DataTrak software allows the representation and analysis of the pro-
files. By this means all relevant data are examined and displayed for every point in time. The DataTrak
releases 1.6 and higher recognize the Aladin

®

Pro Ultra and display the respective data.

The PC program enables the diver to keep a personal logbook. Apart from the last 200 minutes of diving,
37 dives are recorded in the logbook of Aladin

®

Pro Ultra. If the data from Aladin

®

Pro Ultra are transfer-

red regularly into the MemoMouse and then to the PC, all dives will be stored in the PC with their profi-
les.Time and date of the dives are automatically recorded and the dives can be printed out on a page for
the diver’s logbook.

1.3 Updates

The last versions of DataTrak and DataTalk are available for free from the Internet
(http://www.uwatec.com). These programs are backwards compatible but not for MS-DOS.

WARNING

«
...
74
75
76
77
78
...
»

Summary of Contents for ALADIN PRO ULTRA





















































































Reviews:

No comments

Related manuals for ALADIN PRO ULTRA

Brand: Valeport Pages: 25

Brand: UEi Pages: 20

Brand: Hach Pages: 138

WJHD309 - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 101

Brand: DAKOTA ULTRASONICS Pages: 48

Brand: TE Connectivity Pages: 9

Brand: Tascam Pages: 4

Brand: Harpers Pages: 8

NANOCOLOR UV/VIS II

Brand: Macherey-Nagel Pages: 99

Brand: Maico Pages: 27

Brand: Magnescale Pages: 14

Brand: National Instruments Pages: 85

Brand: National Instruments Pages: 12

Brand: National Instruments Pages: 18

Brand: National Instruments Pages: 12

Brand: Vanguard Instruments Company Pages: 62

Brand: Vanguard Instruments Company Pages: 58

Brand: ZHYQ Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands