background image

66

1 Survey

VI Uwatec

®

Aladin

®

Pro Ultra

The Aladin

® 

Pro Ultra is equipped with a dive planner which allows the planning of no-stop dives with fre-

ely determinable surface intervals for the portion of oxygen set at the moment. The water temperature of
the most recent dive and eventual altitude sections 

are incorporated in the calculation.

Planning of Nitrox-
dives

Presetting the surface
interval (only during
desaturation)

Planning of no-stop
dives

Planning of decompres-
sion dives

h

DIVEPLAN

depth

dive time

max. depth

deco info

ft

DIVEPLAN

depth

dive time

max. depth

deco info

DECOSTOP

NO STOP

DIVEPLAN

depth

dive time

max. depth

deco info

DECOSTOP

depth

dive time

max. depth

deco info

O

% MIX

% MIX

If you do not alter the setting of the gas mixture (portion of oxygen) the plan-
ning bases on the already set mixture

Planned decompression dives violate the responsible diving practice standards
of every major diving organization. They are not to be attempted by recreational
or sport scuba divers. Only professional divers with extensive experience, training
and the appropriate equipment for decompression diving (including the presence
of an on board recompression chamber) should attempt to plan a decompression
dive!

WARNING

Summary of Contents for ALADIN PRO ULTRA





















































































Reviews: