Uwatec ALADIN PRO ULTRA Operating Manual Download Page 70

Page: 70 / 84

4 Planning a No-Stop Dive

VI Uwatec

Aladin

Pro Ultra

The Aladin

Pro Ultra calculates according to the planned surface interval the

expected production of microbubbles. The diver should increase the surface
interval if <Atn> (Attention) is displayed. This will reduce the risk of micro bub-
ble production in the pulmonary system.

• By repeatedly recalling of the diveplan with varying surface intervals the mini-

mum interval can be determined.

• Diving with the display <Atn>, a clear shortening of the no-stop time and/or

an extension of decompression has to be expected.

• If a dive is made during <Atn>-time, the <Atn>-time following the dive can

increase considerably.

• Making a repetitive dive when <Atn> is displayed will increased your risk of

serious injury or death from decompression sickness!

NO STOP

DO NOT FLY

DIVEPLAN

depth

dive time

max. depth

deco info

DECOSTOP

WARNING

Summary of Contents for ALADIN PRO ULTRA





















































































Search results

Summary of Contents for ALADIN PRO ULTRA

Reviews:

Related manuals for ALADIN PRO ULTRA

Brands by name

Popular brands

Uwatec ALADIN PRO ULTRA, Operating Manual

Search results

Summary of Contents for ALADIN PRO ULTRA

Reviews:

Related manuals for ALADIN PRO ULTRA

Brands by name

Popular brands