UTStarcom CDM1450, Owner'S Manual

Page: 22 / 166

42 43
SPEED DIALS
In idle mode, calls can be placed to numbers stored in Speed Dial by
pressing & holding the location number on the key pad.
For a 2-digit location number, press the first number, then press and hold
the second number.
1.
Press [Menu], select “Contacts”, then “Speed dial”.
2.
To assign a phone number to a location, select the location then
press [Assign].
3.
Highlight a name from your contact list. If the contact has more
than 1 number saved, press the Navigation Key up or down
/ until the correct number for the Speed Dial location is shown.
4.
Press [Done] to save the number to the Speed Dial location.
You will see the contact name next to the Speed Dial location
number in the Speed Dial lists.
CONTACTS
CHANGE RINGER
1.
Press Left Soft Key [Menu], then press “Contacts.”.
2.
Press “Group settings”.
3.
Select an existing group name.
4.
Press Right Soft Key [Options], then scroll to Ringtone and
press .
5.
Press Right Soft Key [Play] to play ringtone.
Select ringtone and press Left Soft Key [Select].
ERASE GROUP
1.
Press Left Soft Key [Menu], then press “Contacts.”.
2.
Press “Group settings”.
3.
Select an existing group name. Only new groups you added can be
changed. The default groups Personal, Family and Business cannot
be deleted.
4.
Press Right Soft Key [Options], then scroll to Erase and
press .
5.
“Erase?” will be displayed. Select "Yes" and press to erase the
group.
CONTACTS
Speed Dial must be activated.
Note
“Unassigned” appears if the location is available.
Note
071012_1450M-EN_REV01.indd 42-43 071012_1450M-EN_REV01.indd 42-43 2007.12.17 10:20:45 AM 2007.12.17 10:20:45 AM