Floor Screed Machine HD 50
42
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 Fax: + 34 96 570 29 83
2) Once a day grease the air release ball valve in the lid of the vessel.
• Scrupulously clean the lubrication points
•
Lubricate until the grease is visibly coming out of the interior of the axle.
9.6
Weekly lubrication points
Machine model with feed hopper: grease the two manual lubrication points in the articulation axle of the
hopper.
•
Carefully clean the lubrication points.
•
Lubricate until the grease is visibly coming out.
9.7
Six monthly lubrication points
It is necessary to lubricate the stationary device and the hand brake as illustrated below:
x
Carefully clean the lubrication points.
x
Lubricate until the grease is visibly coming out.
If kept at a specific height for a prolonged period, the toothed heads of the connection may rust
and thus deteriorate; therefore the toothed connections should be cleaned regularly.
9.8
Automatic lubrication centre
The automatic lubrication centre lubricates the following machine points automatically with the
adequate amount of grease:
1. The mixer axle seals in the mixer tank in the motor part.
2. Back support on the mixer axle, in the blind part.
The front support of the mixer axle should be lubricated once a month. The lubricating point is on the
