Floor Screed Machine HD 50
5
www.utiform.com
departamento.té[email protected]
Tfno. + 34 96 570 29 82 Fax: + 34 96 570 29 83
2.2
Guarantee and responsibility
In general, the “general conditions of sale of the machine” are those which prevail and are which are
made available to the purchaser when finalizing the machine contract. In the event of any damage to persons or
materials, these shall be excluded from liability or guarantee if they are attributable to the following causes:
• inadequate use of the machine
• Inappropriate assembly, operation, handling and maintenance of the machine.
• failure to take into account the manual instructions on transport, storage, assembly, start up,
operation and maintenance ( that is, with particular reference to the 1
st
inspection carried out
following 50 operation hours. All work shall be carried out in an authorized workshop or by
Utiform’s Technical Services Dept).
• own changes made to construction
• insufficient attention paid to machine parts subject to wear,
• Inadequate repairs (only use original
Utiform
spare parts or parts authorized by the
manufacturer).
For safety reasons, only original Utiform spare parts or parts authorized by the manufacturer should be
used.
In the event of any questions or queries regarding the machine, all the registered information should be
provided, and this is also the case when making orders for spare parts, therefore, the following should be
provided:
• machine type and model
• serial number
When carrying out maintenance work, it is essential to ensure cleanliness at all times, particularly in
support and sealing surfaces, which can be subject to considerable damage as a result of dirt.
The duration and reliability of this machine depends on adequate operation and maintenance.
2.3 Correct
use
The HD-50/07 is a pneumatic transporter with a mixing vessel suitable for all known mixes of
screed, mortar and cement up to 16 mm of granulation.
It may be used for plastic materials such as cement screed, anhydrite screed, light concrete, mortar, clay
and straw mix, humus
,
flameproof material, granulated bulk material, such as cement, sand and coarse sand with
a grain of up to 16 mm.
The use of any other materials is only possible following prior agreement and consultation with the
manufacturer.
Any unsuitable use of the machine is prohibited. Correct use includes:
• taking onto account the indications of the instruction manual and
• complying with inspection and maintenance work
